home *** CD-ROM | disk | FTP | other *** search
/ Software Vault: The Gold Collection / Software Vault - The Gold Collection (American Databankers) (1993).ISO / cdr05 / wnav.zip / RESET.SCR < prev    next >
Text File  |  1993-05-15  |  20KB  |  880 lines

  1. ; This is identicle to the TAPCIS PARAMS.SCR
  2. ;
  3. ;
  4. ;
  5. S G DEFAULT^M
  6. L TERM
  7. W !
  8. ;TERMINAL SETTINGS/SERVICE OPTIONS
  9. ;Use this area to change your terminal type/parameters and/or service options.
  10. ;
  11. ; 1 Instructions
  12. ; 2 Change permanent settings
  13. ; 3 Explanation of session vs. permanent
  14. ; 4 Show session vs. permanent
  15. ; 5 Change current session settings
  16. S 2^M
  17. W !
  18. ;PERMANENT SETTINGS
  19. ;
  20. ; 1 Explanation
  21. ; 2 Logon/Service options
  22. ; 3 Display options
  23. ; 4 Terminal type/parameters
  24. ; 5 Transfer protocol/graphic support
  25. ; 6 Make session settings permanent
  26. S 3^M
  27. W !
  28. ;
  29. ;PERMANENT DISPLAY OPTIONS
  30. ;
  31. ; 1 PAGED display                    [NO]
  32. ; 2 BRIEF prompts                   [YES]
  33. ; 3 CLEAR screen between pages      [YES]
  34. ; 4 BLANK lines sent                [YES]
  35. ; 5 Line feeds sent                 [YES]
  36. S 1^M
  37. W !
  38. ;
  39. ;PAGED DISPLAY
  40. ;
  41. ;Permanent setting =                 [NO]
  42. ;
  43. ; 1 YES
  44. ;    (Output is presented in pages;
  45. ;    you are asked to enter <CR> after
  46. ;    each page.)
  47. ;
  48. ; 2 NO
  49. ;    (Output is scrolled continuously
  50. ;    to end of article.)
  51. S 2^M
  52. W !
  53. ;
  54. ;PERMANENT DISPLAY OPTIONS
  55. ;
  56. ; 1 PAGED display                    [NO]
  57. ; 2 BRIEF prompts                   [YES]
  58. ; 3 CLEAR screen between pages      [YES]
  59. ; 4 BLANK lines sent                [YES]
  60. ; 5 Line feeds sent                 [YES]
  61. S ^M
  62. W !
  63. ;
  64. ;  *** The sequence above turns PAGED display off, which is critical ***
  65. ;  ***   for this script to work.  The remainder goes in sequence.   ***
  66. ;
  67. ;
  68. ;
  69. ;PERMANENT SETTINGS
  70. ;
  71. ; 1 Explanation
  72. ; 2 Logon/Service options
  73. ; 3 Display options
  74. ; 4 Terminal type/parameters
  75. ; 5 Transfer protocol/graphic support
  76. ; 6 Make session settings permanent
  77. ;
  78. S 2^M
  79. W !
  80. ;
  81. ;LOGON/SERVICE OPTIONS
  82. ;
  83. ; 1 First service at logon         [MAIN]
  84. ; 2 Mail Waiting            [NOTIFY ONLY]
  85. ; 3 Personal menu established        [NO]
  86. ; 4 TOP goes to                 [COMMAND]
  87. ; 5 Online editor                  [EDIT]
  88. ; 6 Forum presentation mode     [COMMAND]
  89. ; 7 Basic service alerts            [YES]
  90. ;
  91. S 1^M
  92. W !
  93. ;
  94. ;FIRST SERVICE
  95. ;
  96. ;Permanent setting =               [MAIN]
  97. ;
  98. ; 1 MAIN menu
  99. ;    (Normal setting)
  100. ; 2 Designated first service
  101. ;    (You specify which one.)
  102. ; 3 Personal MENU
  103. ;    (A menu you have constructed)
  104. ; 4 COMMAND mode in the personal
  105. ;    file area
  106. ;
  107. S 4^M
  108. W !
  109. ;
  110. ;LOGON/SERVICE OPTIONS
  111. ;
  112. ; 1 First service at logon      [COMMAND]
  113. ; 2 Mail Waiting            [NOTIFY ONLY]
  114. ; 3 Personal menu established        [NO]
  115. ; 4 TOP goes to                 [COMMAND]
  116. ; 5 Online editor                  [EDIT]
  117. ; 6 Forum presentation mode     [COMMAND]
  118. ; 7 Basic service alerts            [YES]
  119. ;
  120. S 2^M
  121. W !
  122. ;
  123. ;MAIL WAITING
  124. ;
  125. ;Permanent setting =        [NOTIFY ONLY]
  126. ;
  127. ; 1 Go to MAIL
  128. ;    (Will take you to Mail when you
  129. ;    have messages waiting)
  130. ; 2 Notify only
  131. ;    (Will notify you that you have
  132. ;    messages waiting - then take you to
  133. ;    your first service)
  134. ;
  135. S 2^M
  136. W !
  137. ;
  138. ;LOGON/SERVICE OPTIONS
  139. ;
  140. ; 1 First service at logon      [COMMAND]
  141. ; 2 Mail Waiting            [NOTIFY ONLY]
  142. ; 3 Personal menu established        [NO]
  143. ; 4 TOP goes to                 [COMMAND]
  144. ; 5 Online editor                  [EDIT]
  145. ; 6 Forum presentation mode     [COMMAND]
  146. ; 7 Basic service alerts            [YES]
  147. ;
  148. S 4^M
  149. W !
  150. ;
  151. ;TOP GOES TO
  152. ;
  153. ;Permanent setting =            [MAIN]
  154. ; As alternative, use 2 and choose INDEX or create a personal menu
  155. ;
  156. ; 1 MAIN menu
  157. ;    (Normal setting)
  158. ; 2 Designated top page
  159. ;    (You specify which one.)
  160. ; 3 Personal MENU
  161. ;   (A menu you have constructed)
  162. ; 4 COMMAND mode in the personal
  163. ;    file area
  164. ;
  165. S 1^M
  166. W !
  167. ;
  168. ;   *** COMMAND mode yields an OK prompt.  MAIN is acceptable as well ***
  169. ;   *** Some other scripts and scripted programs, such as Navigator   ***
  170. ;   *** for the Mac, require MAIN.                                    ***
  171. ;
  172. ;LOGON/SERVICE OPTIONS
  173. ;
  174. ; 1 First service at logon      [COMMAND]
  175. ; 2 Mail Waiting            [NOTIFY ONLY]
  176. ; 3 Personal menu established        [NO]
  177. ; 4 TOP goes to                 [COMMAND]
  178. ; 5 Online editor                  [EDIT]
  179. ; 6 Forum presentation mode     [COMMAND]
  180. ; 7 Basic service alerts            [YES]
  181. ;
  182. S 5^M
  183. W !
  184. ;
  185. ;ONLINE EDITOR PREFERENCE
  186. ;
  187. ;This setting determines the editor you
  188. ;will normally use.  You may change this
  189. ;for a specific forum via the forum
  190. ;options or for Mail via the
  191. ;Mail options.
  192. ;Permanent setting =               [EDIT]
  193. ;
  194. ; 1 EDIT
  195. ;    (does not use line numbers)
  196. ; 2 LINEDIT
  197. ;    (uses line numbers)
  198. ; 3 DEFAULT
  199. ;    (no preference)
  200. ;
  201. S 1^M
  202. W !
  203. ;
  204. ;LOGON/SERVICE OPTIONS
  205. ;
  206. ; 1 First service at logon      [COMMAND]
  207. ; 2 Mail waiting            [NOTIFY ONLY]
  208. ; 3 Personal menu established        [NO]
  209. ; 4 TOP goes to                 [COMMAND]
  210. ; 5 Online editor                  [EDIT]
  211. ; 6 Forum presentation mode     [COMMAND]
  212. ; 7 Basic service alerts            [YES]
  213. ;
  214. S 6^M
  215. W !
  216. ;
  217. ;FORUM PRESENTATION MODE
  218. ;
  219. ;This setting determines the type of
  220. ;presentation you will normally receive
  221. ;in each forum you visit.  You may change
  222. ;this for a specific forum via the forum
  223. ;options.
  224. ;
  225. ;Permanent setting =            [COMMAND]
  226. ;
  227. ; 1 MENU mode - novice/intermediate
  228. ;    (menu of choices)
  229. ; 2 COMMAND mode - expert
  230. ;    (one word prompts)
  231. ; 3 DEFAULT
  232. ;     (no preference)
  233. ;
  234. S 2^M
  235. W !
  236. ;
  237. ;
  238. ;LOGON/SERVICE OPTIONS
  239. ;
  240. ; 1 First service at logon         [MAIN]
  241. ; 2 Mail waiting            [NOTIFY ONLY]
  242. ; 3 Personal menu established        [NO]
  243. ; 4 TOP goes to                 [COMMAND]
  244. ; 5 Online editor                  [EDIT]
  245. ; 6 Forum presentation mode     [COMMAND]
  246. ; 7 Basic service alerts            [YES]
  247. ;
  248. ;S 7^M
  249. ;W !
  250. ; turn basic service alerts on or off, 2 = off
  251. ;S 2^M
  252. ; back to the LOGON/SERVICE OPTIONS menu
  253. ;W !
  254. S ^M
  255. W !
  256. ;
  257. ;PERMANENT SETTINGS
  258. ;
  259. ; 1 Explanation
  260. ; 2 Logon/Service options
  261. ; 3 Display options
  262. ; 4 Terminal type/parameters
  263. ; 5 Transfer protocol/graphic support
  264. ; 6 Make session settings permanent
  265. ;
  266. S 3^M
  267. W !
  268. ;
  269. ;PERMANENT DISPLAY OPTIONS
  270. ;
  271. ; 1 PAGED display                    [NO]
  272. ; 2 BRIEF prompts                   [YES]
  273. ; 3 CLEAR screen between pages      [YES]
  274. ; 4 BLANK lines sent                [YES]
  275. ; 5 Line feeds sent                 [YES]
  276. ;
  277. S 1^M
  278. W !
  279. ;
  280. ;PAGED DISPLAY
  281. ;
  282. ;Permanent setting =                 [NO]
  283. ;
  284. ; 1 YES
  285. ;    (Output is presented in pages;
  286. ;    you are asked to enter <CR> after
  287. ;    each page.)
  288. ;
  289. ; 2 NO
  290. ;    (Output is scrolled continuously
  291. ;    to end of article.)
  292. ;
  293. S 2^M
  294. W !
  295. ;
  296. ;  *** PAGED = NO is essential ***
  297. ;
  298. ;PERMANENT DISPLAY OPTIONS
  299. ;
  300. ; 1 PAGED display                    [NO]
  301. ; 2 BRIEF prompts                   [YES]
  302. ; 3 CLEAR screen between pages      [YES]
  303. ; 4 BLANK lines sent                [YES]
  304. ; 5 Line feeds sent                 [YES]
  305. ;
  306. S 2^M
  307. W !
  308. ;
  309. ;BRIEF PROMPTS
  310. ;
  311. ;Permanent setting =                [YES]
  312. ;
  313. ; 1 YES - expert mode
  314. ;    (You will receive abbreviated
  315. ;    prompts such as ! or More!.)
  316. ; 2 NO - novice/intermediate mode
  317. ;    (You will receive full prompts
  318. ;    such as Enter choice! or Enter
  319. ;    <CR> for more!.)
  320. ;
  321. S 1^M
  322. W !
  323. ;
  324. ;FULL/BRIEF PROMPTS
  325. ;
  326. ;Please note: Now that you will be receiving Short prompts, some CompuServe
  327. ;services may not warn you about SURCHARGED usage of the service.
  328. ;
  329. S ^M
  330. W !
  331. ;
  332. ;PERMANENT DISPLAY OPTIONS
  333. ;
  334. ; 1 PAGED display                    [NO]
  335. ; 2 BRIEF prompts                   [YES]
  336. ; 3 CLEAR screen between pages      [YES]
  337. ; 4 BLANK lines sent                [YES]
  338. ; 5 Line feeds sent                 [YES]
  339. ;
  340. S ^M
  341. W !
  342. ;
  343. ;PERMANENT SETTINGS
  344. ;
  345. ; 1 Explanation
  346. ; 2 Logon/Service options
  347. ; 3 Display options
  348. ; 4 Terminal type/parameters
  349. ; 5 Transfer protocol/graphic support
  350. ; 6 Make session settings permanent
  351. ;
  352. S 4^M
  353. W !
  354. ;
  355. ;TERMINAL TYPE/PARAMETERS
  356. ;
  357. ; 1 TERMINAL type                 [OTHER]
  358. ; 2 Screen WIDTH                     [79]
  359. ; 3 LINES per page                    [0]
  360. ; 4 Form FEEDS                [SIMULATED]
  361. ; 5 Horizontal TABS           [SIMULATED]
  362. ; 6 Chars. received (CASE)          [U/L]
  363. ; 7 Chars. sent in CAPS              [NO]
  364. ; 8 PARITY                         [ZERO]
  365. ; 9 Output DELAYS                     [2]
  366. ;10 ERASE when backspacing          [YES]
  367. ;11 Micro inquiry sequence at logon  [NO]
  368. ;
  369. S 1^M
  370. W !
  371. ;
  372. ;TERMINAL TYPE
  373. ;
  374. ;Permanent setting =              [OTHER]
  375. ;
  376. ; 1 VIDTEX (Professional Connection)
  377. ; 2 ANSI
  378. ; 3 VT100
  379. ; 4 VT52
  380. ; 5 Heath (Zenith)
  381. ; 6 ADM
  382. ; 7 CRT
  383. ; 8 Other
  384. ;
  385. S 8^M
  386. W !
  387. ;
  388. ;TERMINAL TYPE
  389. ;
  390. ;Your terminal type is now [OTHER]
  391. ;and your terminal parameters have been adjusted accordingly.  If you wish to
  392. ;override these parameters, you can append ;TTY to your User ID when logging on.
  393. ;
  394. S ^M
  395. W !
  396. ;
  397. ;TERMINAL TYPE/PARAMETERS
  398. ;
  399. ; 1 TERMINAL type                 [OTHER]
  400. ; 2 Screen WIDTH                     [80]
  401. ; 3 LINES per page                   [24]
  402. ; 4 Form FEEDS                [SIMULATED]
  403. ; 5 Horizontal TABS           [SIMULATED]
  404. ; 6 Chars. received (CASE)          [U/L]
  405. ; 7 Chars. sent in CAPS              [NO]
  406. ; 8 PARITY                         [EVEN]
  407. ; 9 Output DELAYS                     [2]
  408. ;10 ERASE when backspacing           [NO]
  409. ;11 Micro inquiry sequence at logon  [NO]
  410. ;
  411. S 2^M
  412. W :
  413. ;
  414. ;SCREEN WIDTH
  415. ;
  416. ;Permanent setting =                 [80]
  417. ;
  418. ;This determines the number of characters
  419. ;per line.
  420. ;
  421. S 79^M
  422. W !
  423. ;
  424. ;TERMINAL TYPE/PARAMETERS
  425. ;
  426. ; 1 TERMINAL type                 [OTHER]
  427. ; 2 Screen WIDTH                     [79]
  428. ; 3 LINES per page                   [24]
  429. ; 4 Form FEEDS                [SIMULATED]
  430. ; 5 Horizontal TABS           [SIMULATED]
  431. ; 6 Chars. received (CASE)          [U/L]
  432. ; 7 Chars. sent in CAPS              [NO]
  433. ; 8 PARITY                         [EVEN]
  434. ; 9 Output DELAYS                     [2]
  435. ;10 ERASE when backspacing           [NO]
  436. ;11 Micro inquiry sequence at logon  [NO]
  437. ;
  438. S 3^M
  439. W :
  440. ;
  441. ;LINES PER PAGE
  442. ;
  443. ;Permanent setting =                 [24]
  444. ;
  445. S 0^M
  446. W !
  447. ;
  448. ;  *** 0 Lines = non-stop scrolling when terminal is OTHER ***
  449. ;
  450. ;TERMINAL TYPE/PARAMETERS
  451. ;
  452. ; 1 TERMINAL type                 [OTHER]
  453. ; 2 Screen WIDTH                     [79]
  454. ; 3 LINES per page                    [0]
  455. ; 4 Form FEEDS                [SIMULATED]
  456. ; 5 Horizontal TABS           [SIMULATED]
  457. ; 6 Chars. received (CASE)          [U/L]
  458. ; 7 Chars. sent in CAPS              [NO]
  459. ; 8 PARITY                         [EVEN]
  460. ; 9 Output DELAYS                     [2]
  461. ;10 ERASE when backspacing           [NO]
  462. ;11 Micro inquiry sequence at logon  [NO]
  463. ;
  464. S 6^M
  465. W !
  466. ;
  467. ;  *** Note that Tap doesn't care about 4 or 5 ***
  468. ;
  469. ;
  470. ;CHARACTERS RECEIVED (CAPS)
  471. ;
  472. ;Permanent setting =                [U/L]
  473. ;
  474. ; 1 U/L - normal mode
  475. ;    (Output to you will be in upper or
  476. ;    lower case as available on the
  477. ;    host computer.)
  478. ; 2 UPPER only
  479. ;    (You will receive only upper case
  480. ;    output.)
  481. ; 3 LOWER only
  482. ;    (You will receive only lower case
  483. ;    output.)
  484. ;
  485. S 1^M
  486. W !
  487. ;
  488. ;  *** Undoubtedly, you were already set up this way ***
  489. ;
  490. ;
  491. ;TERMINAL TYPE/PARAMETERS
  492. ;
  493. ; 1 TERMINAL type                 [OTHER]
  494. ; 2 Screen WIDTH                     [79]
  495. ; 3 LINES per page                    [0]
  496. ; 4 Form FEEDS                [SIMULATED]
  497. ; 5 Horizontal TABS           [SIMULATED]
  498. ; 6 Chars. received (CASE)          [U/L]
  499. ; 7 Chars. sent in CAPS              [NO]
  500. ; 8 PARITY                         [EVEN]
  501. ; 9 Output DELAYS                     [2]
  502. ;10 ERASE when backspacing           [NO]
  503. ;11 Micro inquiry sequence at logon  [NO]
  504. ;
  505. S 7^M
  506. W !
  507. ;
  508. ;CHARACTERS SENT IN CAPS
  509. ;
  510. ;Permanent setting =                 [NO]
  511. ;
  512. ; 1 NO - normal mode
  513. ;    (Whatever you input will be in the
  514. ;    case you send it.)
  515. ; 2 YES
  516. ;    (Whatever you input will always be
  517. ;    in CAPS regardless of how you send
  518. ;    it.)
  519. ;
  520. S 1^M
  521. W !
  522. ;
  523. ;  *** ALL CAPS is considered to be SHOUTING on most forums ***
  524. ;
  525. ;
  526. ;TERMINAL TYPE/PARAMETERS
  527. ;
  528. ; 1 TERMINAL type                 [OTHER]
  529. ; 2 Screen WIDTH                     [79]
  530. ; 3 LINES per page                    [0]
  531. ; 4 Form FEEDS                [SIMULATED]
  532. ; 5 Horizontal TABS           [SIMULATED]
  533. ; 6 Chars. received (CASE)          [U/L]
  534. ; 7 Chars. sent in CAPS              [NO]
  535. ; 8 PARITY                         [EVEN]
  536. ; 9 Output DELAYS                     [2]
  537. ;10 ERASE when backspacing           [NO]
  538. ;11 Micro inquiry sequence at logon  [NO]
  539. ;
  540. S 8^M
  541. W !
  542. ;
  543. ;PARITY
  544. ;
  545. ;Permanent setting =               [EVEN]
  546. ;
  547. ; 1 EVEN
  548. ; 2 ODD
  549. ; 3 ZERO
  550. ; 4 ONE
  551. ;
  552. S 3^M
  553. W !
  554. ;
  555. ;
  556. S 9^M
  557. W :
  558. ;
  559. ;TERMINAL TYPE/PARAMETERS
  560. ;
  561. ; 1 TERMINAL type                 [OTHER]
  562. ; 2 Screen WIDTH                     [79]
  563. ; 3 LINES per page                    [0]
  564. ; 4 Form FEEDS                [SIMULATED]
  565. ; 5 Horizontal TABS           [SIMULATED]
  566. ; 6 Chars. received (CASE)          [U/L]
  567. ; 7 Chars. sent in CAPS              [NO]
  568. ; 8 PARITY                         [ZERO]
  569. ; 9 Output DELAYS                     [2]
  570. ;10 ERASE when backspacing           [NO]
  571. ;11 Micro inquiry sequence at logon  [NO]
  572. ;
  573. S 0^M
  574. W !
  575. ;
  576. ;
  577. ;TERMINAL TYPE/PARAMETERS
  578. ;
  579. ; 1 TERMINAL type                 [OTHER]
  580. ; 2 Screen WIDTH                     [79]
  581. ; 3 LINES per page                    [0]
  582. ; 4 Form FEEDS                [SIMULATED]
  583. ; 5 Horizontal TABS           [SIMULATED]
  584. ; 6 Chars. received (CASE)          [U/L]
  585. ; 7 Chars. sent in CAPS              [NO]
  586. ; 8 PARITY                         [ZERO]
  587. ; 9 Output DELAYS                     [0]
  588. ;10 ERASE when backspacing           [NO]
  589. ;11 Micro inquiry sequence at logon  [NO]
  590. ;
  591. S 10^M
  592. W !
  593. ;
  594. ;
  595. ;BACKSPACE ERASE
  596. ;
  597. ;Permanent setting =                 [NO]
  598. ;
  599. ; 1 YES
  600. ;    (When a backspace is received,
  601. ;    the host sends a space and another
  602. ;    backspace which has the effect of
  603. ;    erasing the last character typed.)
  604. ; 2 NO
  605. ;    (no special processing when a
  606. ;    backspace is received)
  607. ;
  608. S 1^M
  609. W !
  610. ;
  611. ;  *** Essential setting which should not interfere with any other  ***
  612. ;  *** comm program.  It lets CompuServe manage the cursor position ***
  613. ;
  614. ;
  615. ;TERMINAL TYPE/PARAMETERS
  616. ;
  617. ; 1 TERMINAL type                 [OTHER]
  618. ; 2 Screen WIDTH                     [79]
  619. ; 3 LINES per page                    [0]
  620. ; 4 Form FEEDS                [SIMULATED]
  621. ; 5 Horizontal TABS           [SIMULATED]
  622. ; 6 Chars. received (CASE)          [U/L]
  623. ; 7 Chars. sent in CAPS              [NO]
  624. ; 8 PARITY                         [ZERO]
  625. ; 9 Output DELAYS                     [0]
  626. ;10 ERASE when backspacing          [YES]
  627. ;11 Micro inquiry sequence at logon  [NO]
  628. ;
  629. S 11^M
  630. W !
  631. ;
  632. ;SEND MICRO INQUIRY SEQUENCE AT LOGON
  633. ;
  634. ;Permanent setting =                 [NO]
  635. ;
  636. ; 1 YES
  637. ;    (Use this only if your software
  638. ;    supports an inquiry sequence.)
  639. ; 2 NO
  640. ;
  641. S 2^M
  642. W !
  643. ;
  644. ;  *** NO on MICRO ENQUIRY will save about five seconds each time   ***
  645. ;  *** you log on.  However, some programs, such as Navigator for   ***
  646. ;  *** the Mac, require YES.  Tap will work OK with either setting. ***
  647. ;
  648. ;
  649. ;TERMINAL TYPE/PARAMETERS
  650. ;
  651. ; 1 TERMINAL type                 [OTHER]
  652. ; 2 Screen WIDTH                     [79]
  653. ; 3 LINES per page                    [0]
  654. ; 4 Form FEEDS                [SIMULATED]
  655. ; 5 Horizontal TABS           [SIMULATED]
  656. ; 6 Chars. received (CASE)          [U/L]
  657. ; 7 Chars. sent in CAPS              [NO]
  658. ; 8 PARITY                         [ZERO]
  659. ; 9 Output DELAYS                     [0]
  660. ;10 ERASE when backspacing          [YES]
  661. ;11 Micro inquiry sequence at logon  [NO]
  662. ;
  663. S ^M
  664. W !
  665. ;
  666. ;PERMANENT SETTINGS
  667. ;
  668. ; 1 Explanation
  669. ; 2 Logon/Service options
  670. ; 3 Display options
  671. ; 4 Terminal type/parameters
  672. ; 5 Transfer protocol/graphic support
  673. ; 6 Make session settings permanent
  674. ;
  675. S 5^M
  676. W !
  677. ;
  678. ;TRANSFER PROTOCOLS/GRAPHICS SUPPORT
  679. ;
  680. ;FILE TRANSFER PROTOCOL
  681. ; 1 PROTOCOL preference       [SHOW MENU]
  682. ;GRAPHICS SUPPORT
  683. ; 2 GIF SUPPORT                      [NO]
  684. ; 3 NAPLPS SUPPORT                   [NO]
  685. ; 4 RLE SUPPORT                      [NO]
  686. ;(Note: Please consult your software and hardware documentation for graphics
  687. ;support before changing these settings.)
  688. ;
  689. S 1^M
  690. W !
  691. ;
  692. ;PROTOCOL PREFERENCE
  693. ;
  694. ;Permanent setting =          [SHOW MENU]
  695. ;
  696. ; 1 B Protocol
  697. ; 2 Quick B protocol
  698. ; 3 XMODEM
  699. ; 4 KERMIT
  700. ; 5 A Protocol
  701. ; 6 SHOW MENU
  702. ;    (if this choice is selected, you
  703. ;    will be presented a menu of
  704. ;    protocols when you request a file
  705. ;    transfer.)
  706. ;
  707. S 1^M
  708. W !
  709. ;
  710. ;  *** SHOW MENU is OK here as well, if you use other programs and    ***
  711. ;  *** protocols other than B.  Note that full B-plus implementations ***
  712. ;  *** negotiate the parameters for each transfer.  Thus, a setting   ***
  713. ;  *** here of "Quick B" would actually degrade performance vs B+     ***
  714. ;
  715. ;
  716. ;TRANSFER PROTOCOLS/GRAPHICS SUPPORT
  717. ;
  718. ;FILE TRANSFER PROTOCOL
  719. ; 1 PROTOCOL preference      [B PROTOCOL]
  720. ;
  721. ;GRAPHICS SUPPORT
  722. ; 2 GIF SUPPORT                      [NO]
  723. ; 3 NAPLPS SUPPORT                   [NO]
  724. ; 4 RLE SUPPORT                      [NO]
  725. ;(Note: Please consult your software and hardware documentation for graphics
  726. ;support before changing these settings.)
  727. ;
  728. S ^M
  729. W !
  730. ;
  731. ;
  732. ;PERMANENT SETTINGS
  733. ;
  734. ; 1 Explanation
  735. ; 2 Logon/Service options
  736. ; 3 Display options
  737. ; 4 Terminal type/parameters
  738. ; 5 Transfer protocol/graphic support
  739. ; 6 Make session settings permanent
  740. ;
  741. S ^M
  742. W !
  743. ;
  744. ;  *** We're done here.  Backing out.  ***
  745. ;
  746. ;
  747. ;TERMINAL SETTINGS/SERVICE OPTIONS
  748. ;
  749. ; 1 Instructions
  750. ; 2 Change permanent settings
  751. ;
  752. ; 3 Explanation of session vs. permanent
  753. ; 4 Show session vs. permanent
  754. ; 5 Change current session settings
  755. ;
  756. S ^M
  757. W !
  758. ;
  759. ;  *** Still backing out ***
  760. ;
  761. ;CHANGE PERMANENT SETTINGS
  762. ;
  763. ; 1 Confirm
  764. ;    (Select this choice if you wish to
  765. ;    update your User Profile with the
  766. ;    permanent changes you have made.)
  767. ; 2 Cancel
  768. ;    (Select this choice if you do not
  769. ;    wish to save the changes you have
  770. ;    made to your permanent settings.
  771. ;    This will not "undo" the changes
  772. ;    for this session, but they will not
  773. ;    be in effect the next time you log
  774. ;    onto CompuServe.)
  775. ;
  776. S 1^M
  777. W !
  778. ;
  779. ;CompuServe               PROFILE
  780. ;
  781. ;CHANGE YOUR USER PROFILE
  782. ;
  783. ; 1 Terminal Settings
  784. ; 2 Change Your Password
  785. ; 3 Password Security Guidelines
  786. ; 4 Change Your Billing Options
  787. ;    or Credit Card Information
  788. ; 5 Change Your Billing Address
  789. ;
  790. S go mail^M
  791. W !
  792. ;
  793. ;  *** Headed for CompuServe Mail to enter name and set parameters  ***
  794. ;
  795. ;
  796. ;CompuServe Mail
  797. ;
  798. ;No messages pending
  799. ;
  800. ;
  801. S no^M
  802. W !
  803. ;% Invalid command
  804. ;
  805. ;  *** The "Invalid command" error is OK.  The "no" responds to a question ***
  806. ;  *** CompuServe asks if this is your first visit in 30 days.             ***
  807. ;Mail Address Book
  808. ; 1 INSERT an entry
  809. ; 2 CHANGE an entry
  810. ; 3 DELETE an entry
  811. ; 4 LIST Address Book
  812. ; 5 Enter/Change your NAME
  813. ;
  814. S set edit noline^M
  815. W !
  816. ;
  817. ;Mail  Address Book
  818. ;
  819. ; 1 INSERT an entry
  820. ; 2 CHANGE an entry
  821. ; 3 DELETE an entry
  822. ; 4 LIST Address Book
  823. ; 5 Enter/Change your NAME
  824. ;
  825. S set page off^M
  826. W !
  827. ;
  828. ; RETAIN allows you to UNDELETE messages deleted during the past
  829. ; 24 hours. This sets it as the default.
  830. ;
  831. S set retain YES^M
  832. W !
  833. ;
  834. S set^M
  835. W !
  836. ;
  837. ;Mail  Options Menu
  838. ;
  839. ;[ ] Represents Current Setting
  840. ;    (yes/no options toggle)
  841. ;
  842. ; 1 EDITOR uses line numbers [NO]
  843. ; 2 MODE of operation is [MENU]
  844. ;   (MENU, PROMPT, COMMAND)
  845. ; 3 Output is PAGED [NO]
  846. ;
  847. S 2^M
  848. W !
  849. ;
  850. ;Mail  Mode Menu
  851. ;
  852. ; 1 MENU  - (Novice User)
  853. ;   List of choices in menu form.
  854. ; 2 PROMPT - (Intermediate User)
  855. ;   Brief list of commands.
  856. ; 3 COMMAND - (Expert User)
  857. ;   One word prompt.
  858. ;
  859. S 3^M
  860. W !
  861. ;
  862. ;Mail  Options Menu
  863. ;
  864. ;[ ] Represents Current Setting
  865. ;    (yes/no options toggle)
  866. ;
  867. ; 1 EDITOR uses line numbers [NO]
  868. ; 2 MODE of operation is [COMMAND]
  869. ;   (MENU, PROMPT, COMMAND)
  870. ; 3 Output is PAGED [NO]
  871. ;
  872. S ^M
  873. W !
  874. ;
  875. ;Make changes permanent for
  876. ;future Mail sessions ? (Y or N)
  877. ;
  878. S Y^M
  879. W !
  880.